Paramount Forge
Flanges
Certifications & Approvals        Download Catalogues        Quality Policy        Process        Exports       Events        Enquiry        Careers      
 
Flanges
Flanges  Rolled Rings  Spectacle Blinds  Blinds & Tube Sheets

Flanges
We manufacture various type of steel flanges, pipe flanges, steel pipe flanges, stainless steel pipe flanges, stainless steel flanges as per customer recognized material standard (ASME/ANSI/DIN). The flanges are also manufactured as per customer specific requirement/ drawings. Lap Joint Flanges
Lap Joint Flanges, while requiring a seperate end connector, provides a joint in which the product does not come in contact with the flange. In addition the ability of the flange to rotate simplifies assembly and alignment of bolting on systems requiring frequent dismantling.

Slip-On Welding Flanges
Slip-On Welding Flanges are popular for normal service conditions because of the ease of fit up and alignment and the greater tolerance permissable in cutting the pipe to length.

Recommended fabrication practice is to weld at both the flange hub and the pipe end.

Socket Welding Flanges
Socket Welding Flanges are widely used for moderate services, particularly in the smaller sizes, because of the ease of fit-up and alignment. Although usually welded at the flange hub only, the pole end may also be welded without having to reface the flange. The end weld can be ground to provide a smooth bore.

Flanges Threaded Flanges
Threaded Flanges are widely used because no welding equipment is required for assembly and both the pipe and flange can be completly salvaged upon dismantling. Accurately cut, clean, tapered pipe thread dismensioned to ANSI A2.1 Pipe threads assure strong, tight joints.

Welding Neck Flanges
Welding Neck Flanges are designed to be butt welded to the pipe. the long tapered hub reinforces the flange, permits stress- relieving, magnafluxing or x-raying the weld, when required and removes the flange face from the heat affected zone.

These advantages makes Welding Neck flanges particularly suitable for severe service involving high pressure, extreme temperatures or hazardous fliuds. Production capability



Dimensional Standard Size Range Rating

ASME / ANSI / B16.5

½” to 24”

Class 150 to 2500 Lbs

MSS-SP-44

12” to 60”

Class 150 to 900 Lbs

ASME / B16.47 / API 605

26” to 60”

-

ASME / ANSI / B16.36

1” to 24”

Class 300 to 2500 Lbs

BS 3293

26” to 48”

Class 150 to 600 Lbs

ASME / B16.48 / API 590

½” to 24”

Class 150 to 2500 Lbs

API 6A

2 1/16” to 30”

2000 Psi to 20000 Psi

DIN

DN10 to DN3600

PN6 to PN 160